Home » Worldwide Electric Motors & Gear Reducers » Electric Motors » Hyundai Crown Triton Series Electric Motors - IEEE-841
Hyundai Crown Triton Series Electric Motors - IEEE-841
Hyundai Crown Triton Series
Offer above and beyond severe duty requirements with Hyundai Heavy Industries IEEE-841 C-Face motors. Exclusively distributed by WorldWide Electric, these motors include added features like: epoxy paint, ProTech® IP66 seals on both the drive end and opposite drive end, precision balance, and the lowest vibration spec and best thermal protection in the industry.
Offer above and beyond severe duty requirements with Hyundai Heavy Industries IEEE-841 C-Face motors. Exclusively distributed by WorldWide Electric, these motors include added features like: epoxy paint, ProTech® IP66 seals on both the drive end and opposite drive end, precision balance, and the lowest vibration spec and best thermal protection in the industry.
- 1-100 HP
- 3600 and 1800 RPM
- Single voltage, 460 volt
- TEFC enclosure
- IP55 degree of protection
- Dual rated service factor 1.15 for 40°C / 1.0 for 65°C
- Class F insulation with Class N varnish
- C-face - rigid base
- Full compliance with IEEE-841, version 2009
- Premium Efficiency
- Class B temperature rise
- NEMA design B torque
- 5-year warranty
- Parker Hannifin ProTech IP66 labyrinth seals on both drive-end and opposite drive-end bearings
- Inverter duty, 10:1 CT / 1000:1 VT
- Inverter shield insulation and inverter grade magnet wire meets or exceeds NEMA MG-1 Part 31 for exceptional corona and transient protection
- IEEE-841 motor test report supplied with each motor
- Suitable for 50 hz operation with 1.0 service factor
- CSA Certified for Class I, Division 2, Groups A, B, C, D
- Hyundai Crown Triton Series
- Three-Phase