Stainless Steel Washdown Motors – TEFC Enclosure – C-Face

STAINLESS STEEL/WASHDOWN DUTY- TENV TEFC
Our Stainless Steel / Washdown Duty motors are rated for a 1.15 service factor (1.0 w/ AC Drive), feature a TENV enclosure (rated IP56), and double lip seals on both ends of the motor with an additional shaft slinger for added protection. O-rings are also installed on end bells & through bolts. They come with a 304 stainless steel shell frame, stainless steel shaft, and a watertight cord connector with a junction box.
  • 1/3-2 HP
  • 1800 and 3600 RPM
  • 208-230/460 volt
  • TENV enclosure - IP56 degree of protection
  • 1.15 service factor
  • Class F insulation
  • C-face - rigid base and round body
  • 304 stainless steel frame, end bracket and junction box
  • Stainless steel shaft
  • Double lip seals on both ends of the motor with an additional shaft slinger on the drive-end
  • O-rings installed on endbells to eliminate moisture
  • Pre-installed watertight, stainless cord connector
  • Inverter duty
  • Suitable for 50 hz operation with 1.0 service factor
  • Three-Phase