Click to enlarge

Radial Special Ball Bearing

Model: 6200-2RS-1/2
6200 Series Japanese
Price Each: 9.81
Total Price: $9.81

Product Details

Manufacture:  Nachi , NSK , NTN

Bore MM:  12.7

Bore Decimal:  0.5000

OD MM:  30

OD Decimal:  1.8110

W MM:  9

W Decimal:  0.3543


Static Load Rating:  505

Enclosure:  Double Sealed

Interchange:  n/a

Weight:  0.07

Special Bore 1/2" X  Bearing 6200-2RS-1/2  - 1/2" bore the 6200-2RS 10 mm bore is the standard and most commonly used
6200-2RS. Sometimes OEM's design in this 1/2" bore metric O.D. bearing because 1/2" shafting can be cost saving when it comes to finding shafting. Single row deep groove ball bearings are the most widely used ball bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls.
  • Excellent for high speeds
  • Good radial load capacity
  • Acceptable axial load capacity in both directions
  • Have low torque capacity at startup and running speeds
  • Can operate with low noise
  • Require little maintenance
These bearings have 2 contact rubber seals, installed on both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.