Home » Metric & Standard Bearings » Needle Bearing Section » FC, RC, FCL, RCB, Needle Bearing Roller Clutch Metric & Inch » FC14 ID. 14 MM - 0.5511 OD. 20 MM - 0.787 W 16 MM - 0.629
Click to enlarge

FC14 ID. 14 MM - 0.5511 OD. 20 MM - 0.787 W 16 MM - 0.629

Model: FC14
ID. 14 MM - 0.5511 OD. 20 MM - 0.787 W 16 MM - 0.629
Price Each: Call for Availability
Quantity:
 
Product Details

ID Decimal:  0.5511

ID MM:  14

OD Decimal:  0.7870

OD MM:  20

W Decimal:  0.6290

Type:  Metric

Interchange:  INA HF-1416, Torrington FC-14, Consolidated   FC-14

Weight:  0.02


The mounted clutch engages when the housing is rotated relative to the shaft in the direction of the arrow marking stamped on the clutch. When manufactured the outer cup of the clutch is accurately drawn from strip steel, it can go slightly out of round durning heat treatment. When the assembly is pressed into a ring gauge or properly prepared houding of the correct size and wall thickness, it becomes round and is properly sized. The proper inspection procedure is as follows:
  1. Press the assembly into a ring gauge of the proper size as given in the tabular data.
  2. Gauge the bore with the specified plug gauges of the proper size, as given in the tables of diamensions.
  • a. The locking plug is rotated to insure lockup when the clutch is operated on low limit shaft and ids mounted in high limit housing strong enough to properly size the clutch.
  • b. The overrun plug is rotated to insure free overruning when the clutch is operated on high limit shaft and is mounted in a low limit housing.
  • c. The go plug and no go plug insure proper size of the bearings in the clutch and bearing assemblies.